Power supply
You can also power the product via USB for testing or when you set it up for the first time. The
BAT (2) indicator shows whether the correct operating voltage has been applied, regardless of
the status of the device itself:
•
LED off = no external power
•
LED green or red = external power available, battery connected correctly
•
LED orange = power available, but no battery connected
SIM card configuration and installation
First of all, you have to change the PIN code of the SIM card for the SIM card in order to work
with the alarm system.
But in order to prevent tampering, you should urgently change the SIM card PIN
again after the product has been put into operation. The process is described in the
Configuration chapter.
•
Insert the SIM card for the alarm system into your mobile phone.
•
Change the PIN code of the SIM card to “1513” (check your mobile phone manual).
•
Remove the SIM card from the mobile phone.
•
Remove the four screws on the rear of the alarm system case and remove the cover.
•
Open the slot for the SIM card (19) and insert the SIM card correctly (note the bevelled corner
of the SIM card).
•
Close the SIM card slot (19) again.
Connecting the integrated battery
•
Connect the wire of the integrated battery to one of the two battery ports (20) or (21).
12
