8. Getting started
As a basic rule, before putting the product into operation, always check whether it
is suitable for the respective application! If in doubt, please consult a person with
knowledge, an expert or the manufacturer of the products before using it!
Installation and electrical connection must be carried out by a specialist.
Please select the place of installation carefully so that the device neither impacts
normal driving activities nor causes distraction from the traffic.
No parts or lines may be installed within the range of the fully-expanded airbag, as this
may lead to injuries of the occupants in the event of an accident.
Modifications to the vehicle, which may become necessary when installing the alarm
system or other components, must always be carried out in such a manner that neither
traffic safety nor design stability of the motor vehicle are impaired.
Take into account the accident hazards caused by equipment becoming dislodged in
the event of an accident. Fasten thus all the components securely in a location, where
they will not pose a risk to the passengers.
a) Preparing the system
Before you install the system in your vehicle, connect the integrated battery and insert a
preconfigured SIM card.
You will need the following items to configure the SIM card:
•
the SIM card itself (SMS-capable, prepaid or contract), which is later inserted into the device
• a mobile phone to configure the SIM card
•
if necessary, a USB power supply (for example, the USB port of a computer, a power supply
with USB connector) for the alarm system.
11
