From now on you must use in each new SMS command the new PIN code followed
by hash (#). If you have entered an incorrect PIN code or you have forgotten your PIN,
you will receive an SMS error notification.
When changing the PIN code, both the PIN settings of the car alarm system and the
PIN code of the installed SIM card will change! The PIN code will always consist of 4
numbers.
If the PIN code is lost (lost or forgotten), you can restore the product’s factory settings (see
chapter “Reset to factory settings”). You will loose all settings on reset! After that you need to
program the device from scratch.
Configuration of the vibration sensors GUARD
The alarm system has an internal vibration sensor, which can detect mechanical impacts
(parking jostles, breakage of a window, etc.).
The ideal sensitivity adjustment depends on many factors such as where the sensor
is mounted, how it is attached to the body, size of the vehicle, etc. and you have to
experiment a little to find out.
Sensitivity should be set high enough, so that heavy, passing vehicles (for example, a
truck) won’t trigger an alarm.
The sensitivity can be set within the range of 0-10, whereby: 0 = off / 10 = maximum sensitivity
Configuration command:
SET GUARD <sensitivity> #1513
Switching the vibration sensor off:
RESET GUARD #1513
Establishing the current status:
STATUS #1513
22
