Setting the time zone only:
SET TIMEZONE <zz> #1513
zz = time zone difference in hours (-12h to + 12h)
Test the desired settings with the following command:
TEST TIMEDATE # 1513
Managing the phone book
The alarm system memory can store up to 6 phone numbers.
You can program the alarm to send an SMS to the phone number in question (by
an S after the phone number) or to call this phone number (by an C after the phone
number).
In the case of an alarm event, all of the stored phone numbers will be notified. If
multiple phone numbers are used, the notification will also accordingly be sent
multiple times.
However, only phone numbers stored for incoming SMS commands will be accepted.
The alarm system can only process the international format for phone numbers.
Example:
0177/12131415 > c4917712131415
(+49 = country code and then area code without 0)
Setting up the phone numbers in the phone book:
SET TEL1 S +49111… #1513
SET TEL2 C +49222… #1513
…
SET TEL6 S+49666… #1513
When you send the command “SET TEL ....”, you will receive an SMS response with a list of
the stored phone numbers:
GKA200 v1.xx
TEL1 S +49111…
TEL2 C +49222…
….. etc. ……
20
