Renkforce GKA200 страница 36 Скачать руководство пользователя

Страница: 36 / 40

The alarm system does not send an alarm notification

•

You have no SIM card installed.

•

The PIN code of the SIM card is set incorrectly. Enter the right PIN.

• There are no phone numbers configured for alarm notifications.
•

The alarm system is not enabled. Send your activation SMS “ALARM ENABLE #<PIN>” to

the alarm system.

The alarm system does not send an vibration alert

•

The vibration sensor function is disabled. Use the appropriate SMS command to enable the

sensor.

•

The sensitivity of the vibration sender is set too low. Adjust the sensitivity with the appropriate

SMS command.

•

Shake the alarm system and see whether the ACC (3) indicator goes on.

The alarm system does not send alerts when it detects noise

•

The sound sensor function is disabled. Use the appropriate SMS command to enable the

sensor.

•

The sensitivity of the sound sensor is set too low. Adjust the sensitivity with the appropriate

SMS command.

•

The alarm system is installed in an unfavourably location. Try a location that is more suitable

for the acoustic monitoring of the area to be protected.

The alarm system does not send an alarm notification when the PIR sensor is triggered

•

The PIR sensor is disabled. Use the appropriate SMS command to enable the sensor.

•

The PIR sensor is installed in an unfavourably location. Try a location that is more suitable for

monitoring the area to be protected.

The alarm system does not send GPS coordinates. The GPS (4) indicator is not flashing.

•

The alarm function is switched off. Use the appropriate SMS command to enable the function.

•

The GPS antenna is poorly positioned and has no GPS reception. Check the location of the

GPS antenna. It should have a “view” towards the sky. Do not place the GPS antenna behind

glass panes with heating wires or metallized film.

•

The connection cable of the GPS module is damaged.

Содержание GKA200









































Результаты поиска

Содержание GKA200

Отзывы:

Похожие инструкции для GKA200

Бренды по названию

Популярные бренды

Renkforce GKA200, Руководство по эксплуатации

Результаты поиска

Содержание GKA200

Отзывы:

Похожие инструкции для GKA200

Бренды по названию

Популярные бренды