Programming of alarm times
The alarm system offers the option to hold the alarm mode at certain times. This is like the
automatic change to the “ALARM ENABLE” or “ALARM DISABLE” mode.
Use the following command.
SET HOLDALARM <Start hh> <Start mm> <Stop hh> <Stop mm> <Day(s)> #1513
The parameter “Day(s)“ is used for the weekday(s):
mo: Monday
tu: Tuesday
we: Wednesday
th: Thursday
fr: Friday
sa: Saturday
su: Sunday
all: daily
The parameters “Start hh” and “Start mm” stand for the start time, the time at which the alarm
on hold mode should stop.
The parameters “Stop hh” and “Stop mm” stand for the end time, the time at which the alarm
on hold ends.
Single-figure numbers have a leading “0” (thus enter “09” not just “9”).
If different times are used over the day you will also need multiple commands.
24
