Renishaw apply innovation SPA2, Руководство по установке

Страница: 13 / 39

System description 11
1.2.2 SPA 2 DC motor connector kit
This kit contains the motor output connection cards to permit three DC motors to be connected to the
SPA 2 unit. Normally these would be supplied with the SPA unit and do not need to be ordered separately,
unless you are converting an existing system.
1.2.3 SPA 2 encoder interface card kit
This kit contains the optional encoder interface card for the SPA 2 system, this permits connection of up to
4 encoder (digital) motor feedback systems.
NOTE: Each SPA
2
unit can only support one encoder interface card permitting:
•
four encoder inputs on a 3 + 1 axis system (using 4
th
axis card)
•
three encoder inputs on a 6 axis system
This kit contains the following components:
•
1 off SPA
2
encoder interface card
•
1 off internal connection loom
1.2.4 SPA 2 4
th
axis interface card kit
This kit contains the optional 4
th
axis interface card for the SPA 2 system. This permits connection of an
additional machine axis to the SPA 2 when using the UCC 2 controller.
NOTE: Each SPA 2 unit can only support one 4
th
axis interface card.
This kit contains the following components:
•
1 off 4
th
axis interface card
•
1 off internal connection loom
•
1 off internal connection power loom
•
4
th
axis hardware mounting kit
•
1 off mating motor connector for machine wiring