Renesas SmartBond UM-B-041 Скачать руководство пользователя страница 29

Страница: 29 / 170

UM-B-041

SmartBond Production Line Tool

User Manual

Revision 4.8

02-Nov-2022

CFR0012

29 of 170

6.3

Prerequisites

Before executing the code, the packages indicated in

Table 7

should be installed on the PC. Some

are required only if users would like to build the PLT code. Others are optional depending on the
tests or actions needed.

Table 7: Production Line Tool Prerequisites

Item

Optional

Description

Visual Studio 2017 Express

Yes

The IDE used to edit and debug the Production Line Tool.
This is only required if users would like to edit the software.

vc_redist.x86.exe

Already described in

Table 6.

Users should agree to the

license requirements described during the installation of any
of these packages. The license file can also be found here:

https://www.visualstudio.com/license-terms/mt171551/

MSXML6

Installed by default in Win 10/11.

.NET framework 4.5

Needed for the graphical user interface applications.

Latest FTDI drivers

Tested with FTDI v2.12.24, v2.12.26, v2.12.28 and
v2.12.36.4

drivers.

NI-VISA 15.5

Yes

Used for optional instrument control, like Bluetooth

tester and voltage meter.

NI-VISA 15.5 can be downloaded from

http://www.ni.com/download/ni-visa-15.5/5846/en/

NI-488.2 15.5

Yes

Used for instrument control, like Bluetooth

LE tester and

DMM.

NI-488.2 15.5 can be downloaded from

http://www.ni.com/download/ni-488.2-15.5/5859/en/

NI-DAQmx

Yes

Used for optional instrument control like temperature
measurements using the NI USB TC01 sensor.

Содержание SmartBond UM-B-041











































































































































































Результаты поиска

Содержание SmartBond UM-B-041

Отзывы:

Renesas SmartBond UM-B-041, Руководство пользователя, Страница: 29 / 170

Результаты поиска

Содержание SmartBond UM-B-041

Отзывы: