Caution:
Before assembling or disassembling the juicer, make sure it is switched off
and unplugged.
To make cleaning easier, you can pre-rinse the juicer immediately after using.
1. To pre-rinse the Nutrex Press
TM
Juicer, put the Juicer Outlet Stopper on and close
it. Place the Juice Catcher under the Juice Outlet.
a. Turn it “ON” and pour enough water into the Juicing Bowl to fill it
(300 ml).
b. Let it run for 30 seconds; open the Juicer Outlet Stopper to let the water flow
out. Repeat if necessary.
2. Turn it “OFF”, unplug it and disassemble the juicer and wash all parts (except the
Motor Base) in warm soapy water with a soft sponge or cloth. To avoid scratching,
do not use abrasive scrubbing pads or sponges on plastic parts.
• All parts, except the Motor Base, are dishwasher safe. Never immerse or rinse the
Motor Base in water.
• Do not clean the juicer with any products containing ammonia or bleach, or
scouring powders, as they may dull, scratch or mar the surface.
• Use the soft brush (included) to clean holes in the Strainer Basket and the Outlets
should they become clogged.
• Clean the Motor Base with a damp sponge or cloth.
CARE AND MAINTENANCE
14