REMKO RXT 1053 DC Скачать руководство пользователя

Страница: 19 / 84

4.3 Keys on the remote control

12
13

Fig. 17: Keys on the remote control

"ON/OFF" key

Press this key to switch the air conditioning unit on

and off.

Operating mode selection

This key is used to set the desired operating mode.

The automatic, cooling, dehumidification, heating

and recirculation modes are available.

Fan speed

Use this key to select the desired fan speed. The

automatic, low, medium and high functions are

available. Note: In the dehumidification mode, the

fan speed cannot be set manually.

"SLEEP" key

Activates/deactivates the "SLEEP" function.

Pressing this key will automatically increase or

decrease the target temperature by 1 °C within an

hour in cooling and heating mode respectively.

Press this key to maintain the most convenient

temperature and save energy. This function is only

available in "Cooling", "Heating" and "Auto" modes.

If the unit is working in "SLEEP" mode, this activity

is interrupted by pressing the "MODE", "FAN",

"Speed" or "ON/OFF" keys.

“FRESH” key (no function)

"TURBO" key

Activation of the turbo function makes it possible to

reach the setpoint in cooling or heating mode as

fast as possible.

“SELF CLEAN” key (no function)

“ARROW UP” and “ARROW DOWN” keys

“ARROW UP” key

Press the key in order to increase the setpoint in 1

°C steps to a maximum 30°C.

“ARROW DOWN” key

Press the key in order to reduce the setpoint in 1°C

steps to a minimum 17°C.

“SILENCE/FP” key (no function)

"TIMER ON" key

Press this key to activate the unit start delay time.

Each press of this key increases the delay time by

30 minutes. When the set time on the display

exceeds 10.0, each press of the button increases

the set time by 60 minutes. To deactivate the delay

time, set the time to 0.0.

"TIMER OFF" key

This key can be used to program the delayed

switch-off time. Each press of this key increases

the switch-off time by 30 minutes. When the set

time on the display exceeds 10.0, each press of

the button increases the set time by 60 minutes.

To deactivate the switch-off time, set the time to

0.0.

Swing mode

Press this key to start or stop the swing mode.

With the 2-point key, you can change the fin set-

tings on the left side. The right key has no function.

Press this key once to change the angle by 6

degrees. Pressing the key for 2 seconds stops the

swing function.

Содержание RXT 1053 DC





















































































Результаты поиска

Содержание RXT 1053 DC

Отзывы:

Похожие инструкции для RXT 1053 DC

Бренды по названию

Популярные бренды

REMKO RXT 1053 DC, Руководство по сборке и эксплуатации

Результаты поиска

Содержание RXT 1053 DC

Отзывы:

Похожие инструкции для RXT 1053 DC

Бренды по названию

Популярные бренды