REMKO RXT 1053 DC, Руководство по сборке и эксплуатации

Страница: 65 / 84

Cleaning the filter
1. Disconnect the power supply to the unit.
2. Open the front side of the unit by folding the
grill down/forwards (Fig. 61).
3. Pull the filter out in an upwards direction
(Fig. 61).
4. Clean the filter with a commercially available
vacuum cleaner. To do so, turn the dirty side
so it is facing upwards (Fig. 62).
5. Dirt can also be removed by carefully
cleaning with lukewarm water and mild
cleaning agents (Fig. 63). The dirty side
should be face down.
6. If water is used, let the filter dry out properly
in the air before fitting it back into the unit.
7. Carefully insert the filter. Ensure that it
locates correctly.
8. Close the front side as described above in
reverse order.
9. Switch the power supply back on.
10. Switch the unit back on.
Cleaning the condensate pump (accessories)
The indoor unit may contain an optional integrated
or separate condensate pump, which pumps out
any accumulated condensate into higher posi-
tioned drains.
Observe the care and maintenance instructions in
the separate operating manual
Fig. 61: Fold the guard forwards
Fig. 62: Cleaning with a vacuum cleaner
Fig. 63: Cleaning with lukewarm water
65