REMA TLM77 RMH/100, Руководство пользователя

Страница: 7 / 31

7
THANK YOU VERY MUCH FOR CHOOSING OUR HYDRAULIC JACK. FOR YOUR SAFETY AND
CORRECT OPERATION, PLEASE CAREFULLY READ THE MANUAL BEFORE USE.
NOTE: All of the information reported herein is based on data available at the time of printing.
The factory reserves the right to modify its own products at any time without notice or
incurring in any sanction. Please verify with the factory for possible updates.
1. Warning in advance
1.1 This jack shall be operated only by qualified personnel.
1.2 The use of this jack should follow every important points described in this manual,
otherwise the injury of operators or damage of articles might be caused because of
neglect during use of this jack.
1.3 Before operation, operator should check and confirm that the jack is in good state.
1.4 The original manufacturer has no responsibility to the change of jack's mechanical
property caused by maintaining of the third party without any written permission from
manufacturer except repairing by the manufacturer or his agency.
2. Description
This package includes one jack, one spare parts bag and one this manual.
Capacity (ton) 5ton 10ton 25ton
Lifting height (mm) 230 260 273
Min. height / tooth (mm) 25 30 58
Min. height / head (mm) 368 420 505
Load on the operating handle(kg) 38 40 40
Net weight (kg) 25 35 102
Reduced speed adjustable adjustable adjustable
Temperature range of use -20  C - +50  C -20  C - +50  C -20  C - +50  C
3. Transportation & storage
3.1 Transportation
The operating handle (02) is just for operating the jack. When transporting the jack, it
can not be dropped or be thrown because it may cause the piston of it damaged,
and the pump of it might be spoiled. Therefore, the jack should be fixed before
transporting to avoid it being shocked by other objects.
3.2 Storage
Keeping the folded jack in a dry place.
4. Installment
The installing of jack is very simple .The only thing you should follow is to insert the
operating handle (02) to the socket (04) and screw it tightly in clockwise direction.
5. Operating
5.1 Scope of use
When use this jack, it shall be put on the fixed and solid place, such as reinforced
concrete floor, to lift or to move load vertically or horizontally. In order to lift load in
such limited area of jack, some auxiliary pad can be placed under the base of it. The
tooth plate (43) of jack should be put on the base, so that it can be folded inside
when retracting the jack.