C1
Appendix C
Compliance with EN 602041: 1992
The GV3000 complies with the following sections of standard EN 602041: 1992.
EN602041
Section
Title
6
Protection against electrical shock
6.2.1
Protection by enclosure
6.2.3
Protection against residual voltages
6.3.1
Protection by automatic disconnect of supply
6.4
Protection by the use of PELV (Protective Extra Low Voltage)
7
Protection of equipment
7.2
Overcurrent protection
7.2.3
Control circuits
7.2.6
Transformers
7.5
Protection against supply interruption or voltage reduction and subsequent restoration
8
Equipotential bonding
8.2.1
General (the PE terminal)
8.2.2
Protective conductors (connection points)
8.2.3
Continuity of the protective bonding circuit
8.2.7
Protective conductor connecting points
8.3
Bonding to the protective bonding circuit for operational purposes
8.4
Insulation failures
8.5
Bonding to a common reference potential
8.6
Electrical interferences
9
Control circuit and control functions
9.1.1
Control circuit supply
9.1.3
Protection
9.1.4
Connection of control devices
9.2
Control functions
9.2.1
Start function
9.2.2
Stop function
9.2.3
Operating modes
9.2.5
Operation
9.2.5.3
Stop
9.2.5.6
Holetorun controls
9.2.6
Combined start and stop controls
9.3
Protective interlocks
9.3.5
Reverse current braking
9.4
Control functions in case of failure
9.4.2.1
Use of proven circuit techniques and components
9.4.3
Provisions for redundancy
9.4.3.1
Earth faults
9.4.3.2
Voltage interruption
StockCheck.com
Downloaded from StockCheck.com