REHM 150 3310, Руководство по эксплуатации

Страница: 51 / 64

General maintenance
51
Action Chapter Interval
Have connection cables and
torch
hoses checked by
specialist staff; record testing
in test book provided for that
purpose.
Test also to be carried out
more frequently depending
on local regulations.
Every six months
Have entire welding unit
checked by specialist staff;
record testing in test book
provided for that
purpose.
Test also to be carried out
more frequently depending
on state law
Annually
8.3 Cleaning the inside of the unit
If the REHM welding unit is used in a dusty atmosphere, the inside of the unit
must be cleaned at regular intervals by either blowing them out or using suction.
The frequency of this cleaning is dependent on the particular conditions of use.
Use only clean dry air for blowing through the unit, or employ a vacuum cleaner.
If maintenance or repair work is carried out on this equipment by non-authorised
personnel, or by personnel who have not been specifically trained by Rehm in
the use and repair of this equipment, then manufactures warranty is
automatically invalidated.
8.4 Proper waste disposal
Only for EU countries!
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and
electronic equipment and its implementation in accordance with national law,
electric tools that have reached the end of their life time must be collected
separately and returned to an environmentally compatible recycling facility.