REHM 150 3310, Руководство по эксплуатации

Страница: 36 / 64

Accessories
36
4.3 REHM TIG-torch R-SR 7-17 und R-SR 7-26 DD
with potentiometer and leather
(Article Nos.: R-SR 7-17 4m: 763 1720, R-SR 7-17 8m: 763 1721
R-SR 7-26 4m: 763 1722, R-SR 7-26 8m: 763 1723)
The TIG torch R-SR 7-17 and R-SR 7-26 4m/8m with potentiometer and leather
covering enables the welding current to be adjusted remotely from the torch
handle. The connection of the torch to the machine is via the built-in 7-pole
connection socket. The R-SR 7-17 TIG and R-SR 7-26 4m/8m TIG torches with
integrated potentiometer and leather covering are specifically designed for use
with the Tiger machine series. The use of any other torch with remote control
potentiometer can cause damage to the electrical components of the machine
When the torch button 1 is pressed the display insrument shows the value that
would result during welding from the setting of the torch potentiometer. This
permits precise setting of the welding current prior to welding. Please note here
that when HF ignition is activated high-voltage pulses are applied to the
electrode.
ATTENTION: The use of TIG torches with remote control potentiometers of
any other type other than expressly specified or recommended by Rehm,
will invalidate the manufacturers warranty.
4.4 TIGER SET
(Article No. Tiger 170 DC Set: 150 3311 Tiger 170AC/DC Set: 150 3321
Tiger 210 DC Set: 150 3351 Tiger 210AC/DC Set: 150 3361)
The set comprises of: TIGER 170 / 210 DC or AC/DC complete with metal
carrying case, REHM TIG-torch R-SR 7-17 or R-SR 7-26 with potentiometer and
leather covering, gas regulator and workpiece cable 4m long. The robust metal
carrying case is internal separation compartments. The high quality case locks
offers protection for the machine and its accessories. The case measures
(LxBxH: 640x390x200 mm) and is the ideal way to ensure that the Tiger is
always tidy, complete, and ready for use.
4.5 REHM water cooler RWK 1100 (order no. 753
2310)
The REHM water cooler RWK 1100 has performance data and design matched
to the Tiger 170 /210 DC +AC/DC, and allows you to use water-cooled TIG
torches. This is particularly recommended for welding work at higher currents
and for welding with alternating current. The water cooler forms together with the
Tiger a mobile unit, offering monitoring of the flow quantity and the temperature
of the coolant in addition to the operating states
Auto (requirement-controlled fan
and pump operation), On (permanently activated) and Off (permanently
deactivated).
4.6 Adapter cable (Article No. 360 0390)
This cable is required in order to connect a remote foot or hand control to the
7
–
pole torch connection socket on the machine.