REHM 150 3310, Руководство по эксплуатации

Страница: 11 / 64

Introduction
11
This operating manual contains rules and guidelines relating to the correct use of
your unit. If these rules and guidelines are adhered to then the use of the
equipment can be considered to be correct. Risks generated from use of this
equipment are the sole responsibility of the operator. Where special care and
attention is required, provision must be made for this where appropriate.
If you are unsure about anything at all, then consult your Health and Safety
officer, or contact the REHM Customer Services department.
The documentation supplied with the machine explains the limitations of use of
the equipment and must be adhered to.
The use of this equipment must also be carried out in strict accordance with the
local Health and Safety regulations.
Correct use also entails observing the prescribed assembly, dismantling and re-
assembly, commissioning, operating and maintenance conditions as well as
disposal measures. Please observe in particular the information contained in
chapter 2 Safety.
The unit must only be operated under the above conditions. Any other form of
use is not regarded as correct. The operator bears sole from responsibility for the
consequences of such actions.
1.3 Symbols used in this manual

Lists preceded by a bullet mark: General list

Lists preceded by a square symbol: Working or operating steps which must
be carried out in the order listed.

Chapter 2.2, Warning symbols on the unit
Cross-reference: Refer here to Chapter 2.2, Warning symbols on the unit
Bold type
is used for emphasis
Note!
... indicates tips for use and other particularly useful information.
The safety symbols used in this chapter:

Chapter 2.1
Typographical
markings
Safety symbols