REHM 150 3310, Руководство по эксплуатации

Страница: 46 / 64

Machine faults
46
7. Troubleshooting
7.1 Safety instructions
WARNING!
If a fault occurs which represents a risk to personnel, equipment and/or
their surroundings; the equipment and all work MUST BE STOPPED
immediately. It must also be ensured that it is not possible to turn on the
equipment again until the fault is cleared and made safe.
The equipment should only be used the unit again once the cause of the
fault has been traced and there is no longer any danger represented to
personnel, equipment and/or their surroundings.
Faults can only to be corrected repaired or eliminated by qualified staff,
which observe and implement all of the relevant safety instructions.

Chapter 2
Following a fault, the equipment can only be put back into service after it
has been checked by and approve by suitably qualified staff.