REHM 150 3310, Руководство по эксплуатации

Страница: 6 / 64

Introduction
6
Unless specifically stated in writing to the contrary by REHM Schweißtechnik und
Co., REHM welding units are only for sale to commercial / industrial users and
are intended only for use by these users.
TIGER gas shielded tungsten arc welding units are only to be used:
a) For the correct purpose.
b) Under perfect safety conditions.
REHM welding units must only be operated and maintained by people who are
trained in the use and maintenance of welding units. Only qualified, authorised
and assigned staff may work on, and with these units.
This operating manual contains important instructions as to how you can operate
this equipment, safely, correctly and economically. A copy of the operating
manual is always to be kept at a suitable location at the site where the unit is
being used. It is imperative that you read the information that is compiled for you
in this operating manual before you use the unit. You will find important
instructions for use of the equipment, which will allow you to fully make use of the
technical superiority of your REHM equipment. In addition, you will find
information on servicing, maintenance, and operating safety, as well as functional
reliability.
TIGER gas shielded tungsten arc welding units are designed according to EN
60974-1 Arc welding equipment - Welding power sources for overvoltage
category III and pollution degree 3 and according to EN 60974-10 Arc welding
equipment, Electromagnetic compatibility (EMC) and may only be used with
mains supply systems, which are three phase four wire systems with earthed
neutral conductors.
This operating manual does not replace the instructions from the REHM service
staff.
Documentation about any additional options that are provided must also be
observed.
Modifications to the unit or the attachment of, or installation of any additional
devices is strictly forbidden. Such alterations automatically invalidate all warranty
and liability claims.
The interference by non-authorised third parties, and the tampering of safety
interlocks, or devices automatically invalidate all warranty and liability claims.
Areas of use
Qualification of
operating
personnel
Purpose of this
document
Alterations to the
unit