33
│
REGULUS SRS6 EP Controller - www.regulus.eu
Special functions
menu 6
6.4 Relay functions
menu 6.4
The here explained additional functions can be assigned to unused relays. Every additional function can only
be used once. Pay special attention to the technical data of the relays („B.1. - Speci
fi
cations“ on page 6).
Examples:
6.4.1 - Solar bypass
menu 6.4.1
Use the relay to switch a bypass valve or a bypass pump
This can direct the
fl
ow pass through the storage, when the
fl
ow temperature at the bypass sensor is lower
than the storage that has to be charged.
Settings range: On, Off
6.4.1.1 - Variant
menu 6.4.1.1
This menu determines wether a pump or valve is used to direct the
fl
ow through the bypass.
Settings range: Pump, Valve / Default setting: Valve
6.4.1.2 - Bypass (sensor)
menu 6.4.1.2
The
fl
ow sensor for the bypass function is selected in this menu. Do not install in the return
fl
ow.
Settings range: S1-S8, VFS1, VFS2 / Default setting: none
System 1 +
+
+
1
1
m
e
t
s
y
S
+
4
1
m
e
t
s
y
S
Solar with storage tank
With additional function
Solar Bypass
and Return Flow Increase
Solar with heat exchanger
with additional function
Solid Fuel Boiler
Solar with switching
to storage tank
Thermostat
