│
20
REGULUS SRS6 EP Controller - www.regulus.eu
E 2 - Commissioning help
The
fi
rst time the controller is turned on, language and
clock need to be set.
After that a query appears as to whether you want to
parameterize the controller using the commissioning
help or not. The commissioning help can also be ter-
minated or called up again at any time in the special
functions menu. The commissioning help guides you
through the necessary basic settings in the correct
order, and provides brief descriptions of each parame-
ter in the display.
Pressing the
„esc”
key takes you back to the previous
value so you can look at the selected setting again or
adjust it if desired. Pressing the „esc“ more than once
takes you back step by step to the selection mode,
thus cancelling the commissioning help. Finally, menu
3.2 under operating mode
„Manual”
should be used to test the switch outputs with the consumers connected,
and to check the sensor values for plausibility. Then switch on automatic mode.
E 3 - Free commissioning
If you decide not to use the commissioning help, you should make the necessary settings in the following
sequence:
- Menu 9.
Language (page 49)
- Menu 6.11
Time and date (page 48)
- Menu 6.1
Program selection (page 30)
- Menu 4
Settings, all values (page 25)
- Menu 5
Protective functions if modi
fi
cations are necessary (page 28)
- Menu 6
Special functions if additional changes are necessary (page 30)
Finally, menu 3.2 under operating mode “Manual“ should be used to test the switch outputs with
the consumers connected, and to check the sensor values for plausibility. Then switch on automa-
tic mode.
Observe the explanations for the individual parameters on the following pages, and check whether further
settings are necessary for your application.
Caution
