Regency Grandview G800C Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 92

background image

38

|

Grandview® G800C Gas Fireplace

installation

Wall Board/Drywall Installation G800C

WARNING! Risk of Fire! Comply with all minimum clearances to combustibles as specified.

Finishing Instructions:
It is important to follow the framing and finishing instructions to ensure proper placement of fireplace into the surrounding framing/finishing materials.
Wall board materials 1/2 in. thick are specified in this installation manual to properly align with the optional finishing methods offered with this appliance. The
G800C may be finished to the appliance opening with 1/2 inch thick drywall.
• Ensure that the back and side clearances are maintained.

WARNING! Risk of Fire! Maintain specified air space clearances to combustibles. Inadequate air space could cause overheating and fire.

The appliance is designed to be used with 1/2 in. wall sheathing materials such as drywall, plywood, wood composites, or non-combustible materials.
Thicker materials may be used. Refer to facing and finishing details in this manual.

Facing Material
• Facing and/or finishing materials must never overhang into the glass opening.
• Facing materials may be combustible or non-combustible

WARNING! Risk of Fire! DO NOT apply combustible materials beyond the minimum clearances. Comply with all minimum clearances to combustibles as
specified in this manual. Overlapping materials could ignite and will interfere with proper operation.

PAINTING
If desired finishing includes a painted wall, 100% acrylic latex, oil-based or standard acrylic paints may be used.
Follow paint manufacturer’s instructions for paint and primer application.

NO SCREW ZONE

«
...
36
37
38
39
40
...
»

Содержание Grandview G800C





























































































Отзывы:

Нет отзывов

Похожие инструкции для Grandview G800C

Бренд: Landmann Страницы: 2

Бренд: Cadet Страницы: 13

Бренд: Valor Страницы: 41

CROSSOVER CO10-102

Бренд: Magma Страницы: 22

Бренд: Foremost Страницы: 14

Portrait Senator

Бренд: Valor Страницы: 18

Pro Builder 72 Linear GSB2

Бренд: Lopi Страницы: 68

Бренд: Bali Страницы: 16

Бренд: Spartherm Страницы: 40

Maestro 60/2 Tall RCH

Бренд: Dru Страницы: 68

Бренд: Lamborghini Caloreclima Страницы: 60

Бренд: United States Stove Страницы: 4

Бренд: Napoleon Страницы: 2

CASUAL FIRESIDE BASSO 5150-36RDO

Бренд: O.W. Lee Страницы: 28

Бренд: Stone Age Страницы: 14

LHEACNSS Contour KT1B80

Бренд: Vermont Castings Страницы: 2

Бренд: Mendip Stoves Страницы: 16

Direct Vent Gas Fireplace

Бренд: Element4 Страницы: 92

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды