Regency Grandview G800C, Инструкция для владельца и по установке

Страница: 66 / 92

66
|
Grandview® G800C Gas Fireplace
installation
11.22.19 920-127a
LOG SET INSTALLATION
Page 3 of 4
9. Install Log 5, one end will rest in the notch out on Log 3—the
'Y' end will rest on the 3rd prong from the right on the log grate.
10. Install Log 6 on the left side of Log 1. Line up the pin on Log 1
with the pin hole on Log 6—the opposite end of Log 6 will rest
in the notch in Log 4.
11. Install Log 7 on the right side as shown. The pin hole on the
underside of Log 7 should land on the pin of Log 1. The bottom
of Log 7 will rest on the log grate.
12. Install Log 8 at the front of the log grate. The cutouts in Log 8
should rest in the 4th + 5th prongs from the right of the log grate.
13. Install Log 9 to the right of Log 5. The cutout in Log 9 will rest in
the 2nd prong from the right on the log grate.
Diagram 13—Install Log 7
Diagram 11—Install Log 5
Diagram 14—Install Log 8
Diagram 15—Install Log 9
Diagram 12—Install Log 6
7
1
5
6
1
3
8
9
4
5
14. Install Log 10 as shown. The flat bottom will rest on the firebox
floor and the opposite end will rest on the 3rd prong from the left.
Diagram 16—Install Log 10
10
G800EC/G800C