Regency Fireplace Products U39-NG12, Инструкция для владельца и по установке

Страница: 31 / 60

Regency
®
U39-12 ULTIMATE™ Freestanding Gas Stove
| 31
installation
Log Set Installation
04.05.18 918-039b
U38 / U39
LOG SET INSTALLATION
Read the instructions below carefully and refer to the diagrams. If logs are broken do not use the unit until they are
replaced. Broken logs can interfere with the pilot operation.
The "02" refer numbers (i.e. 02-65) are
molded into the rear of each log.
Pins on Rear Log Support
A
B
3. Place the Middle Left Log B on the two pins as shown.
The gas log kit contains the following:
a) 02-65 Rear Log
b) 02-56 Middle Left Log
c) 02-44 Front Left Log
d)
02-46 Left Top Log
e)
02-45 Front Right Log
f) 02-47 Center Log
g) 02-48 Middle Right Log
C
4. Place Front Left Log C onto the 2 front pins as shown.
Cutout Pin
D
B
A
5. Place the Left Top Log D on the pin on Log B and on top
of the cut-out on Log A.
C
1. Carefully remove the logs from the box and unwrap them.
The logs are fragile, handle with care - do not force into
position.
2. Place Rear Log A on the two pins on the rear log support.