Refco 4687785, Инструкция по установке и эксплуатации

Страница: 6 / 30

Instruction Manual TAP, TAP-CLAMP / Temperature And Pressure Gauge English
5
- The local accident prevention regulations applicable to the area in which the TAP
is being used should also be adhered to, along with general safety guidelines.
- The operating instructions are part of the product and must be stored in close
proximity to the TAP where they should be readily accessible to qualified
personnel at all times.
- The qualified personnel must have carefully read and understood the operating
instructions prior to operating the device.
- The manufacturer shall not be liable for any damage whatsoever arising through
improper use, failure to comply with these operating instructions, assignment of
inadequately qualified personnel, or unauthorised modification of the TAP.
- The General Terms and Conditions as set out in the sales documentation shall apply.
Symbols and writing standards
Illustration Explanation
Warning: Seriuos physical injury can
occur
Caution: Slight physical injury can occur
Damage to the equipment may occur
TAP Temperature and Pressure measuring
device (Temperature clamp + pressure
gauge)
[OK] Control key of the instrument
"OK" Expressions and readouts
Important safety notice
Before working with the TAP, please read the instruction manual carefully. This
manual provides important information regarding the smooth operation, maintenance
and disposal of the TAP.
The TAP must not be used with pressures higher than 60 bar / 870 psi / 6000 kPa.
Protective goggles and gloves should always be worn when using the TAP.
The TAP must not be used with the refrigerant (NH
3
/ R-717) ammonia.