Refco 4687785, Инструкция по установке и эксплуатации

Страница: 22 / 30

Instruction Manual TAP, TAP-CLAMP / Temperature And Pressure Gauge English
21
If pairing was successful, display shows "END".
Paired TAP CLAMP is recognised on TAP display with T and relevant
number (1 to 6).
- If pairing was not successful, display shows "ERROR“. If this
happens, repeat steps above and try again.
Change
Settings
- Press [MENU] button

1 sec. to activate selection mode.
- Press [UP] button

1 sec. to scroll up to the setting field .
- Press [SET] button

1 sec. to enter settings menu.
- Press [UP] or [DOWN] button

1 sec. to scroll to the desired field.
Available fields:
Auto Off
Update
Version
SD Mode
P-Zero
- Press [SET] button

1 sec. to confirm.
Auto Off
- Press [UP] or [DOWN] button

1 sec. to choose the auto shutoff
option. (10 min. / 20 min. / Off)
- Press [SET] button

1 sec. to confirm.
Update Updating refrigerants.
See in chapter maintenance.
Version Current version of refrigerant chart is shown.