Refco 4687785, Инструкция по установке и эксплуатации

Страница: 17 / 30

English Instruction Manual TAP / Temperature And Pressure Gauge
16
Setup and operation
TAP CLAMP
Set-up
TAP CLAMP Insert 3 x 1.5 V (AAA) batteries in the battery compartment
of the TAP CLAMP.
Ensure the batteries are inserted observing the correct polarities. Do
not leave dead batteries in the battery compartment. If you will not be
using the TAP CLAMP for a long period of time, remove the batteries
from the battery compartment.
Switch on - Press [ON/OFF] button, to switch on device.
After start image, display appears
Set
TAP CLAMP
ID - Press [ON/OFF] + [UNIT] button same time < 1 sec. to enter set
mode.
- Scroll from T1 to T6 by pressing [UNIT] button < 1 sec.
- Press [ON/OFF] button

1 sec. to confirm and return to main
display.
Note:
Chosen ID will be transmitting to pressure gauge and is
shown on display.