Refco 4687785, Инструкция по установке и эксплуатации

Страница: 18 / 30

Instruction Manual TAP, TAP-CLAMP / Temperature And Pressure Gauge English
17
Set Auto Off - Press [ON/OFF] + [UNIT] button same time >1 sec. to enter set
mode.
- When Auto Off mode is activated timer symbol
appears.
- Scroll from 10 / 20 / OFF by pressing [UNIT] button <1 sec.
- Press [ON/OFF] button

1 sec. to confirm and return to main menu.
Note:
Factory default Auto Off is set to 20 min.
Subsequent the symbol and the auto off time disappear from display.
Set unit - Press [UNIT] button < 1sec.
- Switch between °C and °F by using [UNIT] button <1 sec.
TAP Pressure Gauge
Set-up TAP Insert 4 x 1.5 V (AAA) batteries in the battery compartment on the
back side of the TAP.
Ensure the batteries are inserted observing the correct polarities. Do
not leave dead batteries in the battery compartment. If you will not be
using the TAP pressure gauge for a long period of time, remove the
batteries from the battery compartment.
Switch on - Press [ON] button to switch on device.
After start, REFCO-logo appears on display.