background image

37

15. Maintenance and cleaning

This product does not require maintenance. Never disassemble it (except for the procedure for inserting the batteries 

into the transmitter described in these operating instructions).
Clean the outside of the transmitter and receiver only with a soft, dry cloth or brush. Never use abrasive cleaning 

agents or chemical solutions, as these may damage the surface of the case.

16. Disposal

a) Product

  Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of 

its service life, dispose of the product according to the relevant statutory regulations.

 

Remove any inserted batteries and dispose of them separately from the product.

b) (Rechargeable) batteries

You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable batteries. 

Disposing of them in the household waste is prohibited.

  Contaminated (rechargeable) batteries are labelled with this symbol to indicate that disposal in the 

domestic waste is forbidden. The designations for the heavy metals involved are: Cd = Cadmium, Hg = 

Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash icon on the left).

Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or wherever 

(rechargeable) batteries are sold.

You thus fulfil your statutory obligations and contribute to environmental protection.

17. Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this product conforms to 

Directive 2014/53/EU. 

  Click on the following link to read the full text of the EU Declaration of Conformity:

 

www.conrad.com/downloads

 

Select a language by clicking on the corresponding flag symbol, and then enter the product order number 

in the search box. The EU Declaration of Conformity is available for download in PDF format.

Содержание GT6 EVO









































Отзывы: