21
d) "NAME" function: changing the model memory name
A 4-digit name can be entered for each of the 20 model memories. The letters A – Z and the numbers 0 – 9 are
available.
Proceed as follows:
• If you have not already done so, first select the desired model memory; see chapter 13. c).
• If you press the knob (14) briefly, the
MODEL
function will be greyed out.
•
Turn the knob (14) to the left or right until the
NAME
function is greyed out, as
shown in the right figure.
• If you press the knob (14) briefly, the first input position of the name will flash
at the bottom of the display.
• You can change the flashing character by turning the knob (14) to the left or
right.
Briefly press the knob (14) to change the input position.
• If you have changed the last input position and pressed the knob (14), the display will stop flashing. The model
memory name has been changed successfully.
If desired, you can now select another function to be changed by turning the knob (14).
To exit the setup menu instead, briefly press the "BACK" button (13). The transmitter will emit a short beep,
and the greyed out field will disappear from functions at the top of the display. The transmitter is back in its
normal mode.
