Reely GT6 EVO Скачать руководство пользователя страница 6

Страница: 6 / 40

6. Safety information

Damage caused due to failure to observe these instructions will void the warranty. We shall not be

liable for any consequential damage.
We shall not be liable for damage to property or personal injury caused by incorrect use or failure

to observe the safety information! Such cases will void the warranty/guarantee.

Normal wear and tear in operation and damages due to accidents (like the receiver antenna tearing off, or

the receiver case breaking etc.) are excluded from the warranty.
Dear Customer, these safety instructions serve to protect not only the product, but also your own safety and

those of other persons. Read this section very carefully before using the product.

a) General information

• The unauthorised conversion and/or modification of the product is prohibited for safety and approval

reasons.

•

This product is not a toy and is not suitable for children under 14 years of age.

•

Do not get the product damp or wet.

•

Operation of a model (for example, a car model) may result in damage to property and/or personal injury.

Ensure that you are sufficiently insured, e.g. by taking out private liability insurance. If you already have

purchased such a policy, contact your provider to check that the remote controlled model is covered by

the policy.

•

Do not connect the drive motor to electric models before the receiver system has been completely

installed. This stops the drive motor from starting before you are ready.

•

Check the functional safety of your model and the remote control system before each use. Inspect the

parts for any signs of damage, such as broken connectors or damaged cables. All moving parts should

move freely, but there should not be any slackness in the bearing.

•

The operation and the handling of RC models must be learned! If you have never steered such a model,

start very carefully and get used to the model's reactions to the remote control commands first. Be

patient!

•

Do not leave packaging material lying around, because it could become a dangerous plaything for

children.

•

If you have any questions that are not answered by these operating instructions, contact us (see

chapter 1 for contact information) or an experienced technician.

Содержание GT6 EVO









































Результаты поиска

Содержание GT6 EVO

Отзывы:

Похожие инструкции для GT6 EVO

Бренды по названию

Популярные бренды

Reely GT6 EVO, Руководство по эксплуатации

Результаты поиска

Содержание GT6 EVO

Отзывы:

Похожие инструкции для GT6 EVO

Бренды по названию

Популярные бренды