Reely 20 77 60, Руководство по эксплуатации

Страница: 160 / 172

160
g) Servo reverse
With this function, you can reverse the operating direction of the servos. To
choose this function, first switch on the transmitter. Press the "UP" and "DN"
buttons at once Use the "UP" and "DN" buttons to select servo functions
"r1" to "r6".
Use the "INC" and "DEC" buttons to switch between normal and reverse.
Attention!
If you make any changes to the servo reverse function, you have to carefully check all control commands
of the remote control afterwards to make sure that you haven’t accidentally changed the function direction
of the wrong servo. The wrong reaction of a servo to a control command is among the most frequent
causes of crashing.
The following assignment changes the working direction of the servos connected:
r1 = servo receiver output CH1
r2 = servo receiver output CH2
r3 = servo receiver output CH3
r4 = servo receiver output CH4
r5 = servo receiver output CH5
r6 = servo receiver output CH6
Figure 43
Figure 42