Reely Sky Exceed, Руководство по эксплуатации

Страница: 54 / 132

54
 
11. Programming Options of the Transmitter
The transmitter offers a simple programming menu for the most
important functions. You can call and operate it using the switching
and trimming buttons (see figure 18).
The push buttons have the following functions:
• Left switching button for servo path limitation (also see figure 1, item 9)
This button calls the programing menu. For this, the button must be pushed and held for 3 seconds. The transmitter
activates the programming menu and then emits 4 short signal sounds. After approx. 5 – 6 seconds without button
input, the transmitter switches back to regular operation.
• Left trim button for the tail function (also see figure 1, item 7)
This button can be used to activate the programming menu items, to switch from menu item to input values and to
save changed settings.
• Right trim button for the tail function (also see figure 1, item 7)
This button switches back from the input value to the menu item or leaves the programming menu on the push of a
button. When calling the programming menu again, the last menu item selected is displayed again if the transmitter
was not deactivated in between.
• Trim buttons for the roll function (also see figure 1, item 4)
These two buttons switch between the individual menu items or the activated input values.
The transmitter emits a short signal sound for each push of a button.
The selected menu item, the called function and the value that can be adjusted always flash in the LC
display.
Figure 18