Reely Sky 20 55 11, Руководство по эксплуатации

Страница: 45 / 132

45
Attention!
The flight control system in the model is equipped with an effective protective circuit which later prevents
the unintentional startup of the drive motor.
However, before each operation of the transmitter, you must ensure that the slider for the motor function
(see figure 3, Pos.12) is in the "Motor off" position. For this purpose, the slider must be moved all the
way to the bottom in position "L".
Contrary to the control sticks for the elevator and the rudder, which always jump back into the central
position independently, the slide control always remains in the last set position.
When the rechargeable batteries are charged or when new batteries are inserted, pull out the antenna of the transmitter
all the way and, for test purposes, switch the transmitter on via the function switch (see figure 2, Pos. 6). The red and
green LEDs (see ill 2, pos. 11) are lit and signal sufficient power supply of the transmitter.
If the power supply is no longer sufficient for proper operation of the transmitter (below approx. 8.8 V), the red LED
starts to blink and a warning beep additionally sounds every second. In this case, you should stop operating your
model as quickly as possible.
For further operation of the transmitter the rechargeable batteries have to be recharged or new batteries have to be
inserted.
In order to avoid the memory effect of NiCd rechargeable batteries, you should only recharge them when the rechargeable
batteries are completely discharged.