STRONG DESIGNS RW EDGE 540V3 30CC
2
Needed to complete:
Engine- 30cc-40cc 2-stroke
(DLE 35ra / PTE 36
or VVRC 40 w/ ¼-32 plugs)
19x8-20x9 prop
Servos- (6) Standard size servos
(min 250oz/in)
Batteries- (2) 1100-2000mah 6v min
Radio System
(Min 5ch)
Optical Kill switch
(2) power switches
3” spinner
Tygon fuel line
Adhesive backed Velcro
Velcro strap
Zip ties
Servo Extensions
Tools and adhesives needed:
Hobby knife
Sealing iron
Allen driver set
Phillips head driver
Adjustable wrench
Forceps
Pen
Low tack Painter’s Tape
5 min and 15 or 30 min epoxy
Petroleum Jelly
Thin and medium CA
Medium thread locker
Drill with bits
Denatured Alcohol
Begin by removing everything from the box
and inspecting for damage or any missing parts.
If there are any damaged or missing parts
please contact RedwingRC immediately.
Before any assembly begins, read over the
manual and make sure you have everything you
need on hand, this will make the assembly go
much faster. It is a good idea to go over all the
seams and shrink any sags in the covering with
a sealing iron set to a moderate temperature
(280 - 300 degrees). - This will be much easier
before assembly and will ensure the seams are
locked down to avoid separation.
From the Pro:
Go over all the edges of the color
scheme with trim solvent using a cotton ball. This will
lock the edges into place.
