STRONG DESIGNS RW EDGE 540V3 30CC
13
•Trim the axle, leaving the mark visible allowing
1-2mm excess to remain and file a flat as shown
for the wheel collar.
From the Pro:
Locating the flat on the bottom of the
axle will allow easy access once the wheel pant is
installed.
•Install the wheel to the axle for the final time
using medium thread lock compound on the
setscrews.
•Locate the landing gear hardware and secure
the gear to the fuselage.
From the Pro:
install the rear-most nut and bolt first
on each side to avoid the front nut from being in the
way of tightening
the rear.
•Locate the wheel pants and
screws.
•The blind nuts are
preinstalled, simply align the
holes and mount the wheel
pants using the supplied bolts
and washers with medium thread lock
compound.
