Trainworx TWX-2120, Assembly Instructions Manual

Page: 1 / 60

TWX-2120 Chain Link Fence Kit
Assembly Instructions
Contents:
3-15” Fence Frames
2-15” Fence Frames with gate bracing
2-2 ½” Gates
8- Gate Wheels
5-fence Screens
2-Gate Screens
1-Post Hole Jig
1-Assembly Instructions
1-Warning placards & No Trespassing Signs
Tools required for assembly;
Medium Viscosity Super Glue
Cyanoacrylate Accelerator (Super Glue Kicker)
Several Toothpicks
Scrap cardboard (to place glue on for assembling)
1.) Place a small puddle of medium viscosity super glue on a piece of scrap cardboard. Using a toothpick carefully
apply a small coat of super glue to one side of the fence frame. (photo 1)
Photo 1
2.) Carefully work one section of the fence frame at a time. Once the glue is applied with the toothpick place the
screen with just a tiny bit of overhang so it can be trimmed if needed.
Photo 2