manualshive.com logo in svg

RedMax AN-100U, Руководство пользователя, Страница: 60 / 106

Поделиться
Скачать
RedMax AN-100U Скачать руководство пользователя страница 60

 Red

MAX

™

  

Base Station

 

user manual

 

 

 

 

 

Doc. #70-00058-01-01-DRAFT 

Proprietary Redline Communications © 2006

 November 

29, 

2006 

Page 60 of 106

 

Daylight Savings

: Check   this box to enable automatic time change for daylight 

savings. 

Syslog Server

: Enter the IP address of the Syslog server to enable this feature. 

Refresh

: Click 

 Refresh Time 

 to poll the time server for the current time. 

DHCP Relay Agent Parameters 

The subscriber can obtain an IP address from the DHCP server only through an base 
station acting as a DHCP Relay Agent. A subscriber can not obtain an IP address from 
any DHCP server on the network segment connected to its local Ethernet port. The base 
station (acting as a DHCP Relay Agent) can be configured for two different modes: 

SS-s should use the same DHCP Server as SC

: Select this option to have the base 

station forward all subscriber DHCP requests to the DHCP server that the base station 
used to obtain its IP address (valid only if field Obtain IP Parameters from DHCP Server 
is enabled above). 

SS-s should use the following DHCP Server

: Select this option to specify the DHCP 

server to be used by subscribers. 

DHCP Server

: Specify the IP address of a DHCP server. The base station forwards 

all subscriber DHCP requests to this address.  

It important to configure the correct lease options on your DHCP Server: 
a) The base station requires option 4, the address of a ToD Server (RFC-868). 
b) If you do not wish your devices to display GMT, you must add option 2 (Time Offset). 
This is a value denoting the number of seconds to offset your time from GMT. For 
example, for the offset of +2 hours you should enter 7200 (some DHCP servers may 
require entering hexadecimal value). In North America, EST is -5 hours (-18000 seconds) 
from GMT and the negative value must be entered. 

Important

: The base station must be rebooted to activate changes to the DHCP Relay 

Agent settings. 

VLAN Management 

Enable Management with VLAN Tagged Traffic

: Check   this box to enable VLAN 

tagged traffic for the SM CID. This setting is used to configure tagged management for 
operation in systems where a single VLAN is used to control the base station wireless 
equipment and the user equipment. After enabling this setting, only traffic with the 
specified VID is recognized for any management commands. This setting does not effect 
operation of the RS-232 Console port. 

VLAN ID

: Enter the VLAN ID. Only traffic tagged with this VLAN ID is recognized by 

the sector controller management process. 

Important

:

 

The VLAN network support should 

be verified before enabling this feature. If the base station is not reachable using the 
VLAN tagged traffic, the Console port (RS-232) CLI command must be used to disable 
this setting.

 

Save

: Save and apply the current field values. 

Cancel

: Restore all displayed fields to the last saved values. 

Default

: Change all displayed fields to the factory default values. 

Содержание AN-100U











































































































Отзывы:

Нет отзывов