RedMax AN-100U, Руководство пользователя, Страница: 42 / 106

Red MAX
™
Base Station
user manual
Doc. #70-00058-01-01-DRAFT Proprietary Redline Communications © 2006 November 29, 2006
Page 42 of 106
4.3.1 Subscribers
Click Subscribers in the menu (left side of screen) to view a summary of the subscribers
currently configured on the base station.
Figure 20: Configuration - Service Class Screen
Subscriber Index : Unique index number to identify this subscriber station. This number
is generated automatically by the base station. The user can also specify an index number
(must be unique) when creating a new subscriber entry.
Subscriber MAC : MAC address of the subscriber. You must enter this information
when creating a new subscriber entry.
Subscriber Name : Enter the name to be used for this subscriber station. This is the
reference used when managing service flows and classifiers on the subscriber.
Note: When upgrading from RedMAX v1.0 this field will automatically be populated with
the subscriber MAC address.
Max Hosts Number : Enter the maximum number of MAC addresses to discover on the
Ethernet interface to this subscriber. Valid only if
Learning Enabled
=
Yes
.
Learning Enabled : Select the learning mode for this subscriber. When enabled, the base
station will discover the MAC addresses of devices on the Ethernet segment connected to
the subscriber Ethernet port. The number of devices detected is limited by the
Max Hosts
Number
setting.
Yes : Auto-learning is enabled for this subscriber.
No: Auto-learning is disabled for this subscriber.
Add : Click
Add
to create a new subscriber listing. This button is active only when a new
MAC address has been specified in the
Subscriber MAC
field.
Delete SS
Subscriber : Select the name of the subscriber station to be deleted.
Delete : Click
Delete
to deactivate and remove all classifiers and service flows for this
subscriber. The subscriber will be removed from the subscribers list.