RedMax AN-100U, Руководство пользователя, Страница: 38 / 106

Red MAX
™
Base Station
user manual
Doc. #70-00058-01-01-DRAFT Proprietary Redline Communications © 2006 November 29, 2006
Page 38 of 106
4.2.3 SS Info
Click SS Information in the menu (left side of screen) to view system information,
Ethernet address settings, and wireless statistics for active subscribers.
Figure 17: Web - Monitoring - SS Info Screen
SS Information
MAC Addr : Subscriber MAC address.
Click on the MAC address (blue text) to view the service flows settings and statistics for
that subscriber.
IP Address: Secondary management IP address for this subscriber.
Mgm Supp: Indicates if the subscriber can be managed over the wireless interface. Refer
to the subscriber user manual for additional information about enabling the remote
management feature.
Yes : The subscriber supports remote management.
No : The subscriber can not be managed remotely.
Channel Mod : Modulation and coding settings.
DL : Modulation and coding setting for downlink channel.
UL : Modulation and coding setting for uplink channel.
Rate Kbits/s : Rate of data transmissions.
DL : Data rate for downlink channel.
UL : Data rate for uplink channel.
CINR dB : Measured ratio of Carrier/(Interf Noise).
Min : Minimum average CINR since system reboot.
Max : Maximum average CINR since system reboot.
Ave : Average measured CINR (measured over last eight uplink bursts).
CRC Errs : Total number of CRC errors detected in transmissions from this subscriber.
RSSI dBm : Received signal strength indicator value measured by the base station based
on the signal received from this subscriber.
Distance Km : Calculated distance from the base station to this subscriber. Distance is in
kilometers.
Refresh : Click Refresh to update the screen with the latest values.
Reset : Click Reset to remotely reboot the selected subscriber.