Red
MAX
™
Base Station
user manual
Doc. #70-00058-01-01-DRAFT
Proprietary Redline Communications © 2006
November
29,
2006
Page 27 of 106
Data Port LEDs
Data Port Link/Act LED
The Link/Act LED lights green when the LAN connection to the host is functioning
properly.
Table 6
:
System - Ethernet Data Port Link/Act LEDs
LED
Description
ON
Link is present.
FLASH
Link is present and there is data activity.
OFF
Link is not active.
Data Port 100 LED
The 100 LED lights solid green when the terminal is operating at 100 Mbps. The LED is
off when operating at 10 Mbps.
Table 7
:
System - Ethernet Data Port 100 LEDs
LED
Description
ON
LAN is operating at 100 Mbps.
OFF
LAN is operating at 10 Mbps.
Data Port FD/Col LED
The FD/Col LED lights green when the port is operating in Full Duplex mode. The LED
flashes when collisions are detected.
Table 8
:
System - Ethernet Data Port FD/Col LEDs
LED
Description
ON
Full duplex operation
FLASH
Packet collisions detected on the LAN
OFF
Half Duplex operation
Note: There are always collisions occurring on a Half-Duplex link.
Mgt Port
The Mgt port is used for out-of-band management and diagnostics. This port can be
disabled and management traffic sent through the data port.
Mgt Port LEDs
Mgt Port Link (Link/Act) LED
The Mgt port Link LED lights green when a link is established.
Table 9
:
System - Ethernet Mgt Port Link LEDs
LED
Description
ON
Ethernet interface is present.
FLASH
Ethernet interface is present and there is data activity.
OFF
Ethernet interface is not active.