RDL-2000
Installation Guidelines
70-00144-01-01
Proprietary Redline Communications © 2011
Page
14
of 52
March 9, 2011
3.3 Deployment Information
Following installation, each RDL-2000 must be configured for operation with a local
Ethernet network. Contact your network system administrator for details.
The following network and RF plan information is required to configure the wireless link.
Table 3: Site Survey - Network Plan Data
Network Setting
Master
Slave
Plan
IP Address
Network Mask
Table 4: Site Survey - RF Plan Data
RF
Setting
Master
Slave
Plan
MU ID
(same as Master)
Band
(same as Master)
Channel BW
(same as Master)
M. Tx Power
(same as Master)
Channel/RF Channels
Antenna Gain
Table 5: Site Survey - Additional Parameters
Setting
Description
Ethernet Mode
Speed and duplex options.
VLAN
Necessary if using VLAN for device management.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
