Redarc Redvision TVMS1280 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 52

Redarc Redvision TVMS1280 Скачать руководство пользователя страница 46

45

4 USER

GUIDE

4.3 The

RedVision

App

The RedVision App allows users to control multiple on-board devices from their
smartphone; for example turning lights, inverter, water pumps and other loads such as
televisions, electric steps and fridges on or off. It also provides the user with the ability
to monitor water levels, temperature, energy (battery power) consumption and storage,
with the battery information available when used with a REDARC Manager battery
management system. The RedVision App replicates MOST of the display and switching
features of the Display.

The RedVision App and its interactions with
the RedVision System have not been tested
on all smartphones available on the market
so is not guaranteed to work on all devices.
However, the app has been designed ot work
with:
• IOS 11. 1 (or later)
• Android 7.0 (or later)
and with
• Bluetooth

®

4.0 (or later).

For a full list of compatible devices as they
become validated, please visit:

www.redarc.com.au/redvision

k

«
...
44
45
46
47
48
...
»

Содержание Redvision TVMS1280





















































Отзывы:

Нет отзывов