Redarc GoBlock PPS12050, Быстрый старт

Страница: 27 / 44

Transporting the GoBlock | 27
Safe Vehicle Transportation
WARNING
ƒ
An unsecured GoBlock can become dangerous in an accident or sudden stop. The GoBlock
must be adequately restrained for safe transportation in a vehicle. Choose appropriate load
restraint equipment, and ensure it’s in good working order before every use.
ƒ
Load straps/restraint equipment must be replaced if they show any signs of wear or damage,
or if the vehicle is in a minor or major accident.
ƒ
Do not leave sharp objects (e.g. drills, saws, knives, blades etc.) leaning on or nearby to the
tie-down straps.
ƒ The GoBlock must be installed behind (not in front) of the vehicle seats. Do not install the
GoBlock in the vehicle interior area shared by occupants.
ƒ
Load straps and rings should each have a minimum 200 kg (440 lb) load capacity.
RECOMMENDED RESTRAINT METHODS
The following methods are recommended to restrain the GoBlock for safe transportation in a
vehicle, however
it is the vehicle operators responsibility to ensure that the restraint method
and equipment comply with local laws and standards.
ƒ
Dock the GoBlock in the PowerDock ( sold separately — refer to installation instructions supplied
with the PowerDock to ensure the dock is correctly installed/anchored), and for instruction on
how to dock the GoBlock.
ƒ
Restrain the GoBlock using tie-down straps attached to vehicle-mounted anchor points. Each
strap and anchor point must be individually rated to a minimum of 200 kg (440 lb). See
'Restrain
the GoBlock using Tie-Down Straps' (page 28) for further information.
CONTENTS