Redarc GoBlock PPS12050, Быстрый старт

Страница: 20 / 44

20 | Charging Vehicle Batteries
CHARGING VEHICLE BATTERIES
The GoBlock can charge a vehicle battery via the Recovery Modes.
Recovery Mode
In the event of a flat vehicle start battery, the GoBlock Recovery feature enables you to sacrifice
some GoBlock charge and safely return it to the flat vehicle start battery.
This process can be initiated when the GoBlock is docked in the PowerDock, or by connecting the
GoBlock Auxiliary Anderson™ Input to a vehicle start battery using Battery Recovery Leads (not
supplied).
Once Recovery is initiated, GoBlock will charge the flat vehicle battery for approximately 15 minutes,
providing enough charge to safely start the vehicle. The 15 minute profile is designed to recover
and perform maintenance on the flat vehicle start battery, providing a much better outcome than a
standard jump-start.
RECOVERY — VIA THE PowerDock
1. Enter Recovery Mode (Dock) by pressing the Control Button until it flashes green.
Flashing green: Recovery (Dock) is ready to initiate.
2. To initiate the Recovery process, press the Control Button for more than one second. The control
button LED will illuminate solid green to indicate that Recovery is in progress.
Solid green: Recovery (Dock) in progress.
3. Progress will be displayed by the Battery Level LEDs. The green Battery Level LEDs will
illuminate at a rate of approximately one LED every three minutes.
4. When Recovery is complete, the four green Battery Level LEDs will flash and an audio tune will
play. This will continue for approximately three minutes, or until a vehicle input is detected.
The green Battery Level LEDs
illuminate in sequence during the
Recovery progress.
All green Battery Level LEDs are
flashing — Recovery is ready.
CONTENTS