Redarc GoBlock PPS12050, Быстрый старт

Страница: 11 / 44

GoBlock Controls and LEDs | 11
Battery Level LEDs
The primary function of the Battery Level LEDs is to display the battery level during both charging
and discharging, however it also displays the following information:
ƒ
Alert Codes to notify the user in the event of an Alert (page 32) .
ƒ
The progress of the Recovery (Dock) and Recovery (Aux) Modes (page 20) .
ƒ
Displays the Power Off count-down when turning the GoBlock off (page 12) .
Note that the Battery Level LEDs always fill from bottom to top consecutively when displaying
the battery charge level. If the Battery Level LEDs display a non-consecutive LED pattern, this is
indicative of an Alert or Recovery progress.
Battery charge remaining
Displays the amount of charge
remaining in the GoBlock. Battery charging progress
Each segment will flash while
it is charging.
LOW BATTERY
When the battery level is low (less than 5% charge remaining), the GoBlock will operate normally.
There will be an alarm tone that will repeat each time the charge level reduces by a further 1%.
When the battery level is critically low (less than 3% charge remaining), the Control button will flash
red, and the GoBlock will disable outputs and will go to sleep. The GoBlock will automatically power
off when the battery level reaches 0%.
CONTENTS