20
3-INSTALLATION AND ASSEMBLY
CONNECTING THE HOT AIR DUCTING
Once the stove is set in place, the hot air piping can be installed.
The air can be channelled by fastening a flexible pipe on the rear part of the stove, in line with the hole on the upper part. Insert the pipe
and block it in place with a clamp.
The air outlet direction can be changed at any time even if it has been ducted.
The stove, by default setting, is designed so that hot air only comes out of the front. In the event one wishes to channel the air, one must
simply lift the top (the biggest part), remove the plate (by removing the 4 screws) and from beneath the plate remove screw “A” which
locks the knob (fig.5).
The fully extracted knob entails air to come out of the back; hence it can be channelled, while the intermediate positions enable to channel
the air at the back and at the front.
