33
4-OPERATION
CONNECTION TO A ROOM THERMOSTAT
The room thermostat is not included with the stove and must be installed by a qualified technician.
ATTENTION!
The electrical wires must not make contact with the hot parts of the stove.
The stove can also be connected to an external thermostat. The procedure below must be followed for the electrical connection:
t
connect the two wires of the cable coming from the room thermostat to the two free terminals of the connector (
position 13
electronic board Chap. 7): The following is required to do so:
For the stove to operate according to the temperature set on the external thermostat knob (
B
) must be set to the minimum position
(15°C).
Remember that when the temperature is reached, the stove does not shutdown but automatically modulates the flame and room fan to
the minimum power. The stove only switches off if the Eco-Stop function has been activated.
"300.5)&3.045"5$"#-&104
#)0-&'03$"#-&1"44"(&
1"445)&5808*3&45)306()5)&)0-&0/5)&#"$,0'5)&4507&
16--5)&5808*3&4'035)&$0//&$5*0/0/5)�"3%*/-*/&8*5)
5&3.*/"- 4&&$)"1
Technical Dept. - All rights reserved - Reproduction is prohibited
