30
4-OPERATION
OPERATING MODE
The product has the following operating mode.
Setting the room temperature (Knob B).
The temperature that is desired in the room in which the product is installed is set via control
B
and ranges from a minimum of 15°C to a
maximum of 30°C.
When this is met, the product setting is equivalent to the minimum consumption values (the flame and hot air fan speed at minimum, see
the following points), and then returns to the set values when the room temperature drops below the set threshold.
Setting the power (Knob C).
Each power level corresponds to a different fuel consumption value: when set to 5, the room becomes warm in a shorter time and the
room temperature can be kept constant when set to 1.
The flame power setting takes effect only after the start-up phase is completed and a steady state is reached.
Setting the hot air fan speed (Knob A).
The hot air fan speed can be adjusted via control
A
.
The fan is activated when the product warms up.
The speed is automatically set to maximum during the shutdown phase in order to cool the product quicker.
SHUTDOWN MODE (Key D)
The product is shutdown by pressing key D. The completely automatic cooling phase then begins, which involves stopping the fuel from
being loaded, the brazier and the smoke evacuation duct being cleaned. The duration of this phase varies according to the number of
hours the product has been on and its position; the hot air fan goes off during the first 10 minutes, whereas the smoke expulsion fan turns
at minimum for a minimum temperature to be reached (default setting).
NEVER SWITCH THE PRODUCT OFF BY DISCONNECTING THE POWER SUPPLY.
Always let it complete the shutdown cycle, otherwise the structure could be damaged and/or problems could arise
in future start-ups.
