15
3-INSTALLATION AND ASSEMBLY
PREPARATION AND UNPACKING
The
Edera
stove is delivered with a number of packages:
t
The first contains the stove (fig. 1).
t
The second contains the three painted metal panels (two sides + 1 front). The cardboard with the sides is packed together with the
stove package (fig. 2).
Open the package, remove the four screws from the base of the product (2 front and 2 rear), which block the stove to the pallet (fig. 3).
The screws are easily reached since the stove is packed without panels (fig. 3). Set the stove in the pre-selected place, making sure this
complies with the requirements. The stove body or the unit must always remain in a vertical position and handled solely with a cart. Pay
particular attention to the door and its glass, protecting them from mechanical knocks that would compromise their integrity.
In any case, the product must always be handled with care. If possible, unpack the stove near the place of installation. The packaging
materials are neither toxic nor harmful, and therefore no particular disposal measures are required.
'*(63&4507&1"$,"(*/( '30/57*&8
'*(63&4507&1"$,"(*/(4*%&"/%'30/51"/&-4
Technical Dept. - All rights reserved - Reproduction is prohibited
