17
3-INSTALLATION AND ASSEMBLY
Therefore, the end user is responsible for product storage, disposal or possible recycling in compliance with the relative
applicable laws
. Position the product without its cladding and connect it to the chimney. Once the connections are complete, assemble
the cladding (steel sides).
If the product must be connected to an exhaust pipe that goes through the rear wall (to enter the chimney), make sure not to force it in.
Adjust the 4 feet (
J
) to level the stove for the smoke exhaust and the pipe to be coaxial. The ceramic sides must not be fitted when the feet
are adjusted as this is carried out inside the cladding.
Attention!!
Do not use and/or force the smoke exhaust pipe when handling the stove as it can damage its operation.
563/5)&'&&5$-0$,8*4&50-08&35)&130%6$5
563/5)&'&&5"/5*$-0$,8*4&503"*4&5)&130%6$5
'005+
Technical Dept. - All rights reserved - Reproduction is prohibited